Display 5 inch TFT Arduino Touch Shield w/SSD1963 for Mega/Due

Description

Spice up your Arduino project with a beautiful large touchscreen display shield with built in MicroSD card connection. This TFT display is big (5" diagonal) bright (12 white-LED backlight) and colorfu 800x480 pixels with individual pixel control. As a bonus, this display has a optional resistive or capacitive touch panel with controller, attached by default

The shield is fully assembled, tested and ready to go. No wiring, no soldering! Simply plug it in and load up our library - you'll have it running in under 10 minutes! Works best with any classic Arduino (Due/Mega 2560). 
This display shield has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. You can connect more sensors, buttons and LEDs.

Of course, we wouldn't just leave you with a datasheet and a "good luck!" - we've written a full open source graphics library at the bottom of this page that can draw pixels, lines, rectangles, circles and text. We also have a touch screen library that detects x,y and z (pressure) and example code to demonstrate all of it. The code is written for Arduino but can be easily ported to your favorite microcontroller!

For people who want the same screen but not in a shield, check out our 5"TFT breakout.

What's included in the package ?

Number	Standard Accessory Name	Quantity
1	5 inch TFT LCD Display with SSD1963 Controller Board	1
2	Arduino Shield	1

*The default power supply is 5V and the default interface is 8080 16-bit parallel interface.

 

Compatible with following Arduino Boards

Board Name	MCU	I/O
Arduino MEGA2560	ATMEGA2560	54
Arduino MEGA1280	ATMEGA1280	54
Arduino Due	AT91SAM3X8EA	54

 

Attention

If you've had a lot of Arduino DUEs go through your hands (or if you are just unlucky), chances are you’ve come across at least one that does not start-up properly.The symptom is simple: you power up the Arduino but it doesn’t appear to “boot”. Your code simply doesn't start running.You might have noticed that resetting the board (by pressing the reset button) causes the board to start-up normally.The fix is simple,here is the solution.

 

Datasheet for Display Module

Format	Documents Name	Version	Language	Update Date	Size
	5 inch 800x480 Pixel Display w/SSD1963 Controller Datasheet	1.1	English	Aug-28-2014	694K
	Controller SSD1963 Datasheet	1.0	English	<div >May-01-2004

574K

Datasheet for Resistive Touch Panel

Format	Documents Name	Version	Language	Update Date	Size
	5 inch 4-Wire Touch Panel Datasheet	1.0	English	May-13-2013	353K
	Resistive Touch Panel Controller XPT2046 Datasheet	1.0	English	May-08-2007	579K

Datasheet for Capacitive Touch Panel

Format	Documents Name	Version	Language	Update Date	Size
	5 inch Capacitive Touch Panel Outline Drawing	1.0	English	Jun-07-2017	190K
	Capacitive Touch Controller GSL1680F Datasheet	1.0	English	Jun-07-2017	1.1M
	gslX680_311_5_F.h	1.0	English	Jun-07-2017	113K
	sunplus_gslX680.c	1.0	English	Jun-26-2015	19K

Datasheet and Schematic for Arduino Shield

Format	Documents Name	Version	Language	Update Date	Size
	ER-AS-SSD1963 Datasheet	1.0	English	Dec-02-2015	642K
	ER-AS-SSD1963 Arduino Schematic Diagram	1.0	English	Jun-24-2015	195K

Tutorial - Arduino Due (MEGA 2560,Uno)Libraries,Examples

Format	Documents Name	Version	Language	Update Date	Size
	Libraries+Examples for 5"Resistive/Capacitive Touch Shield+SD Card	1.0	English	May-28-2019	8.2M